Top
Implantable CO2 Microsensor IMP-CDM1 (Prototype)

CO2 Measurements in Customized Set-Ups

Implantable CO2 Microsensor IMP-CDM1 (Prototype)

The implantable CO2 Microsensor IMP-CDM1 is not mounted into any additional housing and therefore ideally suited for implementation in customized applications. The bare glass fiber tip can be mounted to your own housing, steel tubes, catheters, etc. This tiny probe has a tip size of 250 µm and a maximum outer diameter of 900 µm. As the IMP-CDM1 is free of metal, it can be used in the presence of electromagnetic fields and even NMR environments.

  • CO2 measurements in liquids (0.04 to 5 % CO2)
  • High spatial resolution (250 µm)
  • Ideal for physiological solutions
  • Not influenced by electromagnetic fields
Get a quote Place an order

Technical

Specifications*/** 
*preliminary data
**provided CO2 sensors are used without further handling in physiological solution under physiological conditions
***temperature compensation not available yet. Please contact our experts regarding your measurement temperature
Measurement range0.04 - 5 % CO2 at atmospheric pressure
Response time (t90) for a CO2 change from 0.5 to 1 %< 5 min (at 25 °C)
< 3 min (at 37 °C)
Resolution at 25 °C± 0.01 % at 0.1 % CO2
± 0.1 % at 1 % CO2
Spatial resolution250 µm
Measurement temperature range***From + 12 °C to + 42 °C
Properties** 
CompatibilityAqueous solutions, pH 4 to 9
Cross-sensitivityOrganic solvents, volatile acids (e.g. HCl vapors, acetic acid) and sulfidic environments damage the sensor irreversibly
CalibrationCO2 sensors are pre-calibrated at the required temperature***; re-calibration is possible and recommended

Related products

CO2-1 ST fiber optical carbon dioxide meter for use with Microsensors & Dipping Probes

CO2-1 ST

This small and lightweight CO2 meter can be used with…

More
Manual Micromanipulator with Needle-type O2 Microsensor

Manual Micromanipulator MM

The Manual Micromanipulator MM is specifically designed for…

More
Automated Micromanipulator with Heavy Stand

Automated Micromanipulator AM

The Automated Micromanipulator is specifically designed for…

More
PreSens Profiling Studio Software screenshots

PreSens Profiling Studio

This software enables control of the Automated…

More
Needle-type CO2 Microsensor NTH-CDM1 (Prototype)

Needle-type CO2 Microsensor NTH-CDM1 (Prototype)

The NTH-CDM1 is designed for measuring in small volumes. The…

More
Profiling CO2 Microsensor PM-CDM1 (Prototype)

Profiling CO2 Microsensor PM-CDM1 (Prototype)

The CO2 Profiling Microsensor can be used for all profiling…

More

pCO2 micro (Prototype)

The pCO2 micro is a precise fiber optic CO2 meter. It is…

More

Presens TV

Watch tutorials, webinars and informative videos about PreSens optical sensor systems.

All videos