Top

Robust Oxygen Probe for Process Control

Oxygen Probe for In-Line Measurement OIM-PSt3

The oxygen probe for in-line measurement (OIM) consists of a fitting made of stainless steel with an optical exchange cap (OEC) in which the oxygen sensor is integrated. The OEC is screwed to the top of the metal fitting, and can be exchanged. The OIM is connected to the oxygen meter via an optical fiber, has a standardized thread and length and is compatible with most bioreactors and port adapters. In addition, customized fittings for e. g. sight glasses are offered.

  • Stands autoclaving, SIP (+ 130 °C, 1.5 atm) & CIP (2 % NaOH, + 80 °C)
  • Polarization-free
  • No membrane cleaning and replacement necessary
  • No electrolyte solutions to replenish
  • Pressure resistant
  • Measurement in steel fermenters
  • Oxygen measurements in biotech & pharma
Get a quote Place an order

Applications

Process Control in Biotech & Pharma

The OIMs, the oxygen probes for in-line measurement, are designed for harsh measurement conditions. These systems give high accuracy and are almost maintenance-free as they do not contain any membranes and electrolytes. The sensors are fully autoclavable and sterilizable (CIP & SIP).


In-line Oxygen Measurement in Brewing and Beverage Industry

Even low concentrations of oxygen influence shelf-life and the taste of certain beverages. Due to the extraordinary low detection limit and outstanding accuracy of PreSens trace oxygen sensors, the quality of oxygen-sensitive products such as beer, wine and soft drinks is secured.
The optical sensors have – compared to standard electrodes – a very fast response time and they are very easy to maintain.


Technical

Specifications Gaseous & Dissolved O2 Dissolved O2
*after two-point calibration as described in the manual
Measurement range

0 – 100 % O2

0 – 1000 hPa

0 – 45 mg/L

0 – 1400 µmol/L
Limit of detection 0.03 % oxygen 15 ppb
Resolution

± 0.01 % O2 at 0.21 % O2
± 0.1 % O2 at 20.9 % O2
± 0.1 hPa at 2 hPa

± 1 hPa at 207 hPa

± 0.004 mg/L at 0.091 mg/L
± 0.04 mg/L at 9.1 mg/L
± 0.14 µmol/L at 2.83 µmol/L

± 1.4 µmol/L at 283.1 µmol/L
Accuracy* ± 0.4 % O2 at 20.9 % O2
± 0.05 % O2 at 0.2 % O2
 
Drift at 0% oxygen < 0.03 % O2 within 30 days (sampling interval of 1 min.)
Measurement temperature range from 0 °C to + 50 °C
Response time (t90) < 6 sec. < 40 sec.
Properties    
Compatibility Aqueous solutions, ethanol, methanol
No cross-sensitivity

pH 1 – 14
CO2, H2S, SO2
Ionic species

Cross-sensitivity Organic solvents, such as acetone, toluene, chloroform or methylene chloride
Chlorine gas
Sterilization procedure Steam sterilization
Ethylene oxide (EtO)
Cleaning procedure Cleaning in place (CIP, 2 % NaOH, + 80 °C, + 176 °F)
3 % H2O2
Acidic agents (HCl, H2SO4), max. 4 – 5 %
Calibration Two-point calibration with oxygen-free environment (nitrogen, sodium sulfite)and air-saturated environment
Storage stability 60 months provided the sensor material is stored in the dark

Related products

Fibox 4 Stand-alone Fiber Optic Oxygen Meter

Fibox 4

The battery powered Fibox 4 is designed for easy handheld…

More
Fibox 4 trace handheld fiber optic O2 meter

Fibox 4 trace

The Fibox 4 trace is a stand-alone oxygen meter designed for…

More
Oxygen Exchange Cap OEC-PSt3-YAU for OIM

Oxygen Exchange Cap OEC-PSt3-YAU

The Oxygen Exchange Cap is made of stainless steel and has…

More
OXY-1 WM Wall Mount Fiber Optic Oxygen Meter

OXY-1 WM

The OXY-1 WM is a precise single-channel oxygen meter for…

More
OXY-1 WM trace Wall Mount Optical Trace Oxygen Meter

OXY-1 WM trace

The OXY-1 WM trace is a precise single-channel oxygen meter…

More
OXY-4 SMA 4-channel optical O2 meter

OXY-4 SMA (G3)

This multi-channel oxygen meter is ideally suited for…

More
OXY-4 SMA trace (G3) Multi-Channel Trace Oxygen Meter

OXY-4 SMA trace (G3)

The OXY-4 SMA trace is compatible with sensor spots, dipping…

More
Fibox 3 Fiber Optic Oxygen Meter

Fibox 3

The Fibox 3 is a proven fiber optic meter for precise oxygen…

More
Fibox 3 trace Fiber Optic Trace Oxygen Meter

Fibox 3 trace

The Fibox 3 trace is a proven fiber optic device for precise…

More
Adapter for 25 mm Ports OAD-D25

Adapter for 25 mm Ports OAD-D25

All PreSens OXYPro® series probes and Oxygen Probes for…

More
OXYPro® NPT Process Connection Adapter

OXYPro® NPT

This adapter has a NPT 1/2 thread and is made of PVDF. With…

More
OXYPro® FTM

OXYPro® FTM

The OXYPro® FTM is a metal flow-through connector that can…

More
OXYPro® Triclamp Adapter

OXYPro® Triclamp Adapter

The Triclamp Adapter is an accessory that allows to safely…

More
×

Presens TV

Watch tutorials, webinars and informative videos about PreSens optical sensor systems.

All videos