Watch tutorials, webinars and informative videos about PreSens optical sensor systems.
Find your solution from more than 100 combinations!
Find your solution
Your individual set-up consists of :
PreSens Measurement Studio 2
The PreSens Measurement Studio 2 has been developed and designed to control several PreSens devices connected to a PC / notebook with one software. Easy data management for sensors, measurement files, and users as well as export of files into .csv and .xslx format can be realized with just a few clicks. The intuitive measurement control eases performing precise oxygen, pH and CO2 measurements with multiple devices simultaneously.
The software offers many additional features, like compensation of salinity, so most precise measurements can be conducted. You can also group measurement channels so the temperature and (for O2 & CO2 devices) pressure inputs from one single device can be shared with the rest of the grouped devices. Build your own measurement network and measure O2, pH and CO2 simultaneously, all controlled from one PC.
OXY-1 SMA
Due to its small outer dimensions OXY-1 SMA can be set up almost anywhere. It is compatible with non-invasive sensors, dipping probes and flow-through cells of type PSt3 (detection limit 15 ppb dissolved oxygen, 0 - 100 % oxygen). OXY-1 SMA has temperature compensation, so most precise measurements in environments with changing temperature can be taken. This USB-powered oxygen meter is operated with the PreSens Measurement Studio 2 software, which enables simultaneous control of several devices, so measurement networks can be set up. With numerous features and additional pressure and salinity compensation, the software makes the OXY-1 SMA suitable for almost any application where precise oxygen measurements are needed.
OXY-4 SMA (G3)
This multi-channel oxygen meter is ideally suited for benchtop applications. It is compatible with non-invasive sensors, dipping probes and flow-through cells of type PSt3 (detection limit 15 ppb dissolved oxygen, 0 – 100 % oxygen). Each channel of OXY-4 SMA has separate temperature compensation, so most precise measurements in environments with changing temperatures can be taken. The oxygen meter is USB-powered and operated with the PreSens Measurement Studio 2 software, which enables simultaneous control of several devices, so measurement networks can be set up. With numerous features and additional pressure and salinity compensation, the software makes the OXY-4 SMA applicable in almost any application.
Oxygen Sensor Integrated in Metal Flow-Through Cell FTM-M10-PSt3
An Oxygen Exchange Cap (OEC-M10) with PSt3 sensor (max. measurement range 0 - 100 % O2, limit of detection 0.03 % O2) is integrated in a metal flow-through cell via M10 thread. The FTM is available with connector diameters of 6 mm, 1/4" or 1/2" and can be connected to pipes with other diameters using the respective adapters. For sensor read-out an optical fiber is connected. Fibers covered in a protective metal spiral tube can be connected to the FTM magnetically. The oxygen probe is very robust and long-term stable. It can be cleaned by CIP (Cleaning in place, + 80 °C and 2 % NaOH) and stands steam sterilization (+ 130 °C, 1.5 atm). The OEC-M10 can easily be exchanged, if necessary.