Top

Perfusion monitoring in pipes

Oxygen Sensor Integrated in Metal Flow-Through Cell FTM-M10-PSt3

An Oxygen Exchange Cap (OEC-M10) with PSt3 sensor (max. measurement range 0 - 100 % O2, limit of detection 0.03 % O2) is integrated in a metal flow-through cell via M10 thread. The FTM is available with connector diameters of 6 mm, 1/4" or 1/2" and can be connected to pipes with other diameters using the respective adapters. For sensor read-out an optical fiber is connected. Fibers covered in a protective metal spiral tube can be connected to the FTM magnetically. The oxygen probe is very robust and long-term stable. It can be cleaned by CIP (Cleaning in place, + 80 °C and 2 % NaOH) and stands steam sterilization (+ 130 °C, 1.5 atm). The OEC-M10 can easily be exchanged, if necessary.

  • Max. measurement range 0 - 100 % O2, limit of detection 0.03 % O2
  • Different FTM sizes available
  • No consumption of oxygen
  • Signal independent of flow velocity
  • Autoclavable, SIP (130 °C, 1.5 atm) & CIP (+ 80 °C, 2 % NaOH)
Get a quote Place an order

Applications

In-line Oxygen Measurement in Brewing and Beverage Industry

Even low concentrations of oxygen influence shelf-life and the taste of certain beverages. Due to the extraordinary low detection limit and outstanding accuracy of PreSens trace oxygen sensors, the quality of oxygen-sensitive products such as beer, wine and soft drinks is secured.
The optical sensors have – compared to standard electrodes – a very fast response time and they are very easy to maintain.


Technical

Specifications Gaseous & Dissolved O2 Dissolved O2
*at 20 °C, 960 - 980 hPa; humidified gas mixture
**after customized calibration
***determined changing from 20.9 % oxygen gas to nitrogen 5.0
****determined changing from air-saturated water to a freshly prepared 1 % sodium sulfite solution
Measurement range* Optimal: 0 - 50 % O2, 0 - 500 hPa
Max.**: 0 - 100 % O2, 0 - 1000 hPa
Optimal: 0 - 22.5 mg/L
Max.**: 0 - 45.0 mg/L
Limit of detection* 0.03 % O2 0.020 mg/L
Resolution* 1 % O2 ± 0.02 % O2
20.9 % O2 ± 0.1 % O2
50 % O2 ± 0.4 % O2
0.4 mg/L ± 0.009 mg/L
9 mg/L ± 0.04 mg/L
Response time (t90) < 10 sec.*** < 30 sec.****
Properties
Compatibility Aqueous solutions, ethanol, methanol
No cross-sensitivity pH 1 - 14, CO2, H2S, SO2, ionic species
Cross-sensitivity Organic solvents such as pure acetone, toluene, chloroform or methylene chloride
Chlorine gas
Sterilization procedure Steam sterilization
Ethylene oxide (EtO)
Gamma irradiation
Cleaning procedure Cleaning in place (CIP, 2 % NaOH, + 80 °C, + 176 °F)
3 % H2O2
Acidic agents (HCl, H2SO4), max. 4 % - 5 %
Calibration Two-point calibration with oxygen-free environment (nitrogen, sodium sulfite) and air-saturated environment
Storage stability 5 years provided the sensor material is stored at room temperature in dry conditions and in the dark
Pressure resistance 10 mbar up to 20 bar
Temperature range operation Optimal: 0 °C to + 50 °C
Max.: - 40 °C to  + 90 °C
Temperature range storage Optimal: room temperature (+ 20 °C ± 5 °C)
Max.: 0 °C to + 70 °C
FTM-M10 formats Connector diameter 6 mm 1/4" 1/2"
Inner diameter 4.7 mm 4.8 mm 10.4 mm
Inner volume 1.1 cm3 1.2 cm3 5.0 cm3
Material Stainless steel 316L (body), 304 (OEC-M10)

Related products

Fibox 4 Stand-alone Fiber Optic Oxygen Meter

Fibox 4

The battery powered Fibox 4 is designed for easy handheld…

More
Fibox 4 trace handheld fiber optic O2 meter

Fibox 4 trace

The Fibox 4 trace is a stand-alone oxygen meter designed for…

More
OXY-4 SMA (G2) 4-channel oxygen meter

OXY-4 SMA (G2)

This multi-channel oxygen meter is ideally suited for…

More
OXY-4 SMA trace 4-channel oxygen meter

OXY-4 SMA trace (G2)

The OXY-4 SMA trace is compatible with sensor spots, dipping…

More
OXY-10 SMA 10-channel oxygen meter

OXY-10 SMA (G2)

This multi-channel oxygen meter is ideally suited for…

More
OXY-10 SMA trace (G2) 10-channel trace oxygen meter

OXY-10 SMA trace (G2)

The OXY-10 SMA trace is compatible with sensor spots,…

More
Stand-alone fiber optic trace oxygen meter Fibox 3 LCD trace

Fibox 3 LCD trace

The Fibox 3 LCD trace is a stand-alone fiber optic oxygen…

More
Polymer optical fiber with protective cover POF-SCT

Polymer Optical Fiber with Protective Cover POF-SCT

This polymer optical fiber for all meters with SMA socket is…

More
×

Presens TV

Watch tutorials, webinars and informative videos about PreSens optical sensor systems.

All videos