Watch tutorials, webinars and informative videos about PreSens optical sensor systems.
Wide Range Oxygen Probe with Analog Output
OXYBase® WR-RS485-AO
The OXYBase® WR-RS485-AO combines an optical sensor type PSt3 and electro-optical module in one probe. The sensor has a maximum measurement range of 0 - 100 % O2, and a detection limit of 0.03 % O2 / 20 ppb. As it is waterproof, this probe is ideally suited for e. g. measurements in aquaculture or environmental research projects. OXYBase® is connected directly to the control unit, uses RS485 as digital interface (PreSens proprietary) and has 4 - 20 mA analog output. A serial communication protocol is offered for data exchange between the OXYBase® and a PC or other host unit. For initial operation and adjustment of the 4 - 20 mA output the PreSens EOM-STS software can be used. The probe is available with various cable lengths, and its sensor is integrated in a removable sensor cap (OEC), which can easily be exchanged. These exchange caps are offered in different versions for certain demands (fast response time, safe for food applications, for aggressive environments, USP Class VI compatible). The sensor is not autoclavable.
- Maximum measurement range of 0 - 100 % O2, detection limit 0.03 % O2
- Ideal for e. g. environmental research, aquaculture, sewage
- Waterproof
- Communication via RS485 (PreSens proprietary)
- 4 - 20 mA analog output
- Available with various cable lengths
Applications
Oxygen Monitoring in Aquaculture
OXYBase® are the solution to control dissolved oxygen in aquaculture. The robust probes can be connected to control units so ideal water conditions can be assured, thus also helping to increase yield. OXYBase® are real low-maintenance probes, as a used sensor can simply be replaced by changing the OEC at the probe tip.
OXYBase® in Biological & Environmental Research
OXYBase® are long-term stable probes that can be implanted in soil or other samples for prolonged time periods. They are ideally suited for long-term monitoring of e. g. soil aeration processes, which are very critical for plant productivity, or dissolved oxygen measurements in water samples.
Technical
| Specifications | Gaseous & Dissolved O2 | Dissolved O2 |
|---|---|---|
| *at 20 °C, 960 - 980 hPa; humidified gas mixtures **after customized calibration ***determined changing from 20.9 % oxygen gas to nitrogen 5.0 ****determined changing from air-saturated water to a freshly prepared 1 % sodium sulfite solution | ||
| Measurement range* | Optimal: 0 - 50 % O2, 0 - 500 hPa Max.**: 0 - 100 % O2, 0 - 100 hPa | Optimal: 0 - 22.5 mg/L Max.**: 0 - 45.0 mg/L |
| Limit of detection* | 0.03 % O2, 0.3 hPa | 0.020 mg/L |
| Resolution* | 1 % O2 ± 0.02 % O2, 20.9 % O2 ± 0.1 % O2 | 0.4 mg/L ± 0.009 mg/L, 9 mg/L ± 0.04 mg/L |
| Response time (t90) | < 10 sec.*** | < 30 sec.**** |
| Properties | ||
| Compatibility | Aqueous solutions, ethanol, methanol, cleaning agents containing ClO2 at room temperature | |
| No cross-sensitivity to | pH 1 - 14, CO2, H2S, SO2, ionic species | |
| Cross-sensitivity to | Organic solvents such as pure acetone, toluene, chloroform or methylene chloride Chlorine gas | |
| Cleaning procedure | 3 % H2O2, acidic agents (HCl, H2SO4) max. 4 - 5 % Cleaning agents containing ClO2 at room temperature | |
| Calibration | Two-point calibration in oxygen-free (e. g. nitrogen 5.0, 1 % sodium sulfite solution) and air-saturated environment (20.9 % oxygen, air-saturated water) | |
| Storage stability of sensor cap | 5 years provided the sensor material is stored at room temperature in dry conditions and in the dark | |
| Sampling rate | 1 sec. up to 9 min. 59 sec. | |
| Temperature sensor | NTC | |
| Temperature performance | Accuracy < ± 1 °C | |
| Power supply | 7 - 30 VDC | |
| Power consumption in active mode | Max. 1 W | |
| Power consumption in stand-by mode | < 0.15 W | |
| Temperature range operation | Optimal: 0 °C to + 40 °C Max.: - 10 °C to + 70 °C | |
| Temperature range storage | Optimal: room temperature (+ 20 °C ± 5 °C) Max.: 0 °C to + 70 °C | |
| Pressure resistance* | 3 bar | |
| Dimensions | Probe length: 135 mm, diameter: 12 mm; various cable lengths | |
| Probe housing material | Stainless steel SUS 316 L | |
| Weight | 100 g | |
| Digital interface | RS485 (PreSens proprietary) | |
| Analog output | 4 - 20 mA (current sink) | |