Watch tutorials, webinars and informative videos about PreSens optical sensor systems.
Ideal for Long-Time Submersion in Ocean Water
OXYBase® WR-RS485-SW & WR-RS485M-SW
The OXYBase® WR-RS485-SW & WR-RS485M-SW are wide range oxygen probes with a maximum measurement range of 0 - 100 % O2, and a detection limit of 0.03 % O2. These probes are waterproof and can be submerged completely. Furthermore, their stainless-steel housing has an additional plastic cover which offers protection against environmental impacts. This makes the probes ideally suited for long-term outdoor use in e. g. environmental research applications or aquaculture. These probes use RS485 as digital interface (OXYBase® WR-RS485-SW = PreSens proprietary, OXYBase® WR-RS485M-SW = Modbus RTU) and are connected directly to the control unit. A serial communication protocol is offered for data exchange between the OXYBase® and a PC or other host unit. The probes are available with various cable lengths, and their sensor is integrated in a removable sensor cap (OEC). The sensor is not autoclavable.
- Maximum measurement range of 0 - 100 % O2, detection limit 0.03 % O2
- Ideal for e. g. environmental research, aquaculture
- Waterproof
- Stainless-steel housing with protective cladding
- Communication via RS485 (PreSens proprietary or Modbus RTU)
- Available with various cable lengths
Applications
Oxygen Monitoring in Aquaculture
OXYBase® are the solution to control dissolved oxygen in aquaculture. The robust probes can be connected to control units so ideal water conditions can be assured, thus also helping to increase yield. OXYBase® are real low-maintenance probes, as a used sensor can simply be replaced by changing the OEC at the probe tip.
OXYBase® in Biological & Environmental Research
OXYBase® are long-term stable probes that can be implanted in soil or other samples for prolonged time periods. They are ideally suited for long-term monitoring of e. g. soil aeration processes, which are very critical for plant productivity, or dissolved oxygen measurements in water samples.
Technical
| Specifications | Gaseous & Dissolved O2 | Dissolved O2 |
|---|---|---|
| *at 20 °C, 960 - 980 hPa; humidified gas mixture **after customized calibration ***determined changing from 20.9 % oxygen gas to nitrogen 5.0 ****determined changing from air-saturated water to a freshly prepared 1 % sodium sulfite solution | ||
| Measurement range* | Optimal: 0 - 50 % O2, 0 - 500 hPa Max.**: 0 - 100 % O2, 0 - 1000 hPa | Optimal: 0 - 22.5 mg/L Max.**: 0 - 45.0 mg/L |
| Limit of detection* | 0.03 % O2, 0.3 hPa | 0.020 mg/L |
| Resolution* | 1 % O2 ± 0.02 % O2 20.9 % O2 ± 0.1 % O2 | 0.4 mg/L ± 0.009 mg/L 9 mg/L ± 0.04 mg/L |
| Response time (t90) | < 10 sec.*** | < 30 sec.**** |
| Properties | ||
| Compatibility | Aqueous solutions, ethanol, methanol, cleaning agents containing ClO2 at room temperature | |
| No cross-sensitivity to | pH 1 - 14, CO2, H2S, SO2, ionic species | |
| Cross-sensitivity to | Organic solvents such as pure acetone, toluene, chloroform or methylene chloride Chlorine gas | |
| Cleaning procedure | 3 % H2O2, acidic agents (HCl, H2SO4) max. 4 - 5 % Cleaning agents containing ClO2 at room temperature | |
| Calibration | Two-point calibration in oxygen-free (e. g. nitrogen 5.0, 1 % sodium sulfite solution) and air-saturated environment (20.9 % oxygen, air-saturated water) | |
| Storage stability of sensor cap | 5 years provided the sensor material is stored at room temperature in dry conditions and in the dark | |
| Sampling rate | 1 sec. up to 9 min. 59 sec. | |
| Temperature sensor | NTC | |
| Temperature performance | Accuracy < ± 1 °C | |
| Power supply | 5 - 30 VDC | |
| Power consumption in active mode | Max. 1 W | |
| Power consumption in stand-by mode | < 0.15 W | |
| Temperature range operation | Optimal: 0 °C to + 40 °C Max.: - 10 °C to + 70 °C | |
| Temperature range storage | Optimal: room temperature (+ 20 °C ± 5 °C) Max.: 0 °C to + 70 °C | |
| Pressure resistance | 3 bar | |
| Dimensions | Probe length: 166 mm, diameter: 21.1 mm at cable gland | |
| Probe housing material | Housing: Stainless steel SUS 316 L Housing cover: POM | |
| Weight | 253 g (with 5 m cable length); depends on cable length | |
| Digital interface | RS485 (PreSens proprietary or Modbus RTU) | |