Watch tutorials, webinars and informative videos about PreSens optical sensor systems.
OEM Transmitter for Contactless Oxygen Measurement
Electro-Optical Module EOM-O2-FOM
The EOM-O2-FOM is a precise, single channel module for non-invasive O2 measurement. It is compatible with sensor spots, probes, and flow-through cells of type PSt3 (max. measurement range 0 – 100 % O2, limit of detection 0.03 % O2). The small outer dimensions and low power consumption enable the simple integration into custom monitoring and control systems. The device uses RS232, RS485 or USB 2.0 as a digital interface. A serial communication protocol is offered for data exchange between a PC or another host unit and the EOM. Additionally, the EOM has 4 to 20 mA analog output and a Pt100 temperature sensor interface for temperature compensation of the oxygen measurements.
- Compatible with wide range oxygen sensors type PSt3
- Small dimensions & low power consumption
- Communication via RS232, or RS485 (PreSens proprietary or Modbus RTU)
- 4 to 20 mA (current sink) analog output
- Pt100 temperature sensor interface and on-board pressure sensor
Applications
Pharma Industry: Oxygen Monitoring in Bags
Bags and single-use bioreactors are in the process of revolutionizing the way biopharmaceuticals are manufactured. Our non-invasive oxygen sensors are the tools to make the cultivation vessels fully disposable. As non-invasive pH sensors are also available, the two key parameters oxygen and pH can be controlled online.
Simple Connection to PLC
PLC programming can be a challenging and time-consuming task. Establishing a stable working connection to third-party hardware via interfaces such as RS485 is error prone. PreSens offers you the right support! We provide LAD-schemes and SCL-scripts, the corresponding TIA-project files and even wiring tables to help you connecting your EOM boards to a Siemens-S7-(1200-)PLC, nearly instantly. Nothing stands in the way of further development into company-specific solutions such as process control. Contact our service team!
Technical
| Specifications | |
|---|---|
| O2 sensors | PSt3 (optical SMA connector) |
| Phase resolution | 0.01° |
| Sampling rate | 0.11 sec. – 599.9 sec. |
| Temperature sensor | Four-wire Pt100 sensor interface |
| Temperature performance | 0.1 °C + Pt100 accuracy |
| Supply voltage | 5 – 28 VDC |
| Power consumption in active mode | 0.75 W |
| Power consumption in stand-by mode | 0.25 W |
| Temperature: operating / storage | From 0 °C to + 50 °C / from - 10 °C to + 70 °C |
| Relative humidity | 0 % to 80 % (non-condensing) |
| Dimensions (L x W x H) | 94.2 mm x 25.0 mm x 19.6 mm |
| Weight | 39 g |
| Digital interface | RS232, optionally RS485 (PreSens proprietary or Modbus RTU) USB 2.0 |
| 1Depends on hardware configuration and parameter settings. < 0.7 s only possible without temperature sensor. | |
Related products
Self-adhesive Oxygen Sensor Spot SP-PSt3-SA
With the new self-adhesive technology it is easy to…
Oxygen Sensor Integrated in Metal Flow-Through Cell FTM-M10-PSt3
An Oxygen Exchange Cap (OEC-M10) with PSt3 sensor (max.…
Single-Use O2 Flow-Through Cell FTC-SU-PSt3-S
Miniaturized chemical optical oxygen sensors integrated in…