Top

Robust Probe for Measurement of Smallest Oxygen Traces

Oxygen Dipping Probe DP-PSt9

This oxygen dipping probe is used to measure ultra-low oxygen traces in gasses. It is made of a polymer optical fiber with the oxygen-sensitive sensor attached to one end. In order to protect both – the fiber and the sensor – the fiber end is covered with a high grade steel tube. The dipping probe has an outer diameter of 4 mm and a length of 10 cm. Other lengths are available on request.

  • Excellent long-term stability
  • Pressure resistant (max. 5 bar)
  • Polarization-free
  • No membrane clenaing and replacement necessary
  • No electrolyte solution to replenish
  • Long shelf life
Get a quote Place an order

Technical

Specifications Gaseous O2
*after two-point calibration as described in the manual
Measurement range 0 - 200 ppmv oxygen
Limit of detection 0.5 ppmv oxygen
Resolution 10 ± 0.5 ppmv oxygen
100 ± 0.8 ppmv oxygen
200 ± 1.5 ppmv oxygen
Accuracy at + 20 °C* ± 2 ppmv oxygen or ± 5 %, whichever is higher
Measurement temperature range from 0 °C to + 40 °C
Response time (t90) < 3 sec.
Properties  
Compatibility Gas phase only
No cross-sensitivity CO2, SO2
Cross-sensitivity Organic vapor, Chlorine gas
Calibration Two-point calibration with oxygen-free environment (nitrogen 6.0) and a second calibration value optimally between 100 and 200 ppmv gaseous oxygen
Storage stability 24 months provided the sensor material is stored in the dark at room temperature

Related products

Fibox 4 trace handheld fiber optic O2 meter

Fibox 4 trace

The Fibox 4 trace is a stand-alone oxygen meter designed for…

More
OXY-1 WM trace Wall Mount Optical Trace Oxygen Meter

OXY-1 WM trace

The OXY-1 WM trace is a precise single-channel oxygen meter…

More
×

Presens TV

Watch tutorials, webinars and informative videos about PreSens optical sensor systems.

All videos