Watch tutorials, webinars and informative videos about PreSens optical sensor systems.
Robust Oxygen Probe for Process Control
Oxygen Probe for In-Line Measurement OIM-PSt3
The oxygen probe for in-line measurement (OIM) consists of a fitting made of stainless steel with an optical exchange cap (OEC) in which the oxygen sensor is integrated. The OEC is screwed to the top of the metal fitting, and can be exchanged. The OIM is connected to the oxygen meter via an optical fiber, has a standardized thread and length and is compatible with most bioreactors and port adapters. In addition, customized fittings for e. g. sight glasses are offered.
- Stands autoclaving, SIP (+ 130 °C, 1.5 atm) & CIP (2 % NaOH, + 80 °C)
- No membrane cleaning and replacement necessary
- No electrolyte solutions to replenish
- Pressure resistant
- Measurement in steel fermenters
- Oxygen measurements in biotech & pharma
Process Control in Biotech & Pharma
The OIMs, the oxygen probes for in-line measurement, are designed for harsh conditions like high pressure or oil/water mixtures. These systems give high accuracy and are almost maintenance-free as they do not contain any membranes and electrolytes. The sensors are fully autoclavable and sterilizable (CIP & SIP).
In-line Oxygen Measurement in Brewing and Beverage Industry
Even low concentrations of oxygen influence shelf-life and the taste of certain beverages. Due to the extraordinary low detection limit and outstanding accuracy of PreSens trace oxygen sensors, the quality of oxygen-sensitive products such as beer, wine and soft drinks is secured.
The optical sensors have – compared to standard electrodes – a very fast response time and they are very easy to maintain.
|Specifications||Gaseous & Dissolved O2||Dissolved O2|
|*after two-point calibration as described in the manual|
|Measurement range|| |
0 – 100 % O20 – 1000 hPa
0 – 45 mg/L0 – 1400 µmol/L
|Limit of detection||0.03 % oxygen||15 ppb|
± 0.01 % O2 at 0.21 % O2
± 0.004 mg/L at 0.091 mg/L
|Accuracy*||± 0.4 % O2 at 20.9 % O2|
± 0.05 % O2 at 0.2 % O2
|Drift at 0% oxygen||< 0.03 % O2 within 30 days (sampling interval of 1 min.)|
|Measurement temperature range||from 0 °C to + 50 °C|
|Response time (t90)||< 6 sec.||< 40 sec.|
|Compatibility||Aqueous solutions, ethanol, methanol|
pH 1 – 14
|Cross-sensitivity||Organic solvents, such as acetone, toluene, chloroform or methylene chloride|
|Sterilization procedure||Steam sterilization|
Ethylene oxide (EtO)
|Cleaning procedure||Cleaning in place (CIP, 2 % NaOH, + 80 °C, + 176 °F)|
3 % H2O2
Acidic agents (HCl, H2SO4), max. 4 – 5 %
|Calibration||Two-point calibration with oxygen-free environment (nitrogen, sodium sulfite)and air-saturated environment|
|Storage stability||24 months provided the sensor material is stored in the dark|
The battery powered Fibox 4 is designed for easy handheld...
Fibox 4 trace
The Fibox 4 trace is a stand-alone oxygen meter designed for...
Oxygen Exchange Cap OEC-PSt3-YAU
The Oxygen Exchange Cap is made of stainless steel and has...
The OXY-1 WM is a precise single-channel oxygen meter for...
OXY-1 WM trace
The OXY-1 WM trace is a precise single-channel oxygen meter...
The Fibox 3 is a proven fiber optic meter for precise oxygen...
Fibox 3 trace
The Fibox 3 trace is a proven fiber optic device for precise...
Fibox 3 LCD trace
The Fibox 3 LCD trace is a stand-alone fiber optic oxygen...
The OXY-4 mini is a multi-channel fiber optic oxygen meter...
The OXY-4 trace is a precise multi-channel fiber optic...
The OXY-10 mini allows to control and read out 10 oxygen...
The OXY-10 trace is a precise multi-channel oxygen meter. It...
Adapter for 25 mm Ports OAD-D25
All PreSens OXYPro® series probes and Oxygen Probes for...
This adapter has a NPT 1/2 thread and is made of PVDF. With...
The OXYPro® FTM is a metal flow-through connector that can...
OXYPro® Triclamp Adapter
The Triclamp Adapter is an accessory that allows to safely...
OXYPro® Varivent Adapter
This process connection adapter enables integration of the...