Top

Compact Trace Oxygen Meter with Analog Output

OXY-1 SMA-trace-RS232-AO

The OXY-1 SMA-trace-RS232-AO is compatible with non-invasive sensors, dipping probes and flow-through cells of type PSt3 (detection limit 15 ppb dissolved oxygen, 0 - 100 % oxygen), type PSt6 (detection limit 1 ppb dissolved oxygen, 0 - 5 % oxygen) and PSt9 (detection limit 0.5 ppmv O2, 0 – 200 ppmv O2). This oxygen meter has a USB or RS232 (optionally RS485) digital interface and a 4 to 20 mA (current sink) analog output. OXY-1 SMA-trace-RS232-AO has temperature compensation, so most precise measurements in environments with changing temperature can be taken. The oxygen meter can be operated with the EOM-STS Pro (Serial) or the PreSens Measurement Studio 2 software (USB), which enables simultaneous control of several devices. With numerous features, additional pressure and salinity compensation, the software makes the OXY-1 SMA-trace-RS232-AO suitable for numerous applications.

  • Compact & light-weight
  • Low power consumption
  • Communication via RS232, optionally RS485 (PreSens proprietary)
  • USB 2.0
  • 4 to 20 mA (current sink) analog output
  • Compatible with wide range, trace and ultra-trace oxygen sensors
Get a quote Place an order

Applications

OXY-1 SMA Devices for Biological Research

The OXY-1 SMA and OXY-1 SMA Trace can be set up in a few quick steps and fit almost anywhere. As the devices are powered via USB no extra power connection, cables or adapters are necessary. Use them for fast checks on the oxygen content in samples or continuous long-term measurements. Applicable with different types of slender dipping probes, flow-through cells or non-invasive oxygen sensor spots the OXY-1 SMA devices can be used for oxygen monitoring in most different measurement set-ups. Check the oxygen content in water or sediment samples, monitor microbial O2 consumption or respiration of small organisms, even in perfusion systems oxygen can be measured continuously. With temperature, pressure and salinity compensation these oxygen meters always give precise oxygen measurements and are the tools for every research team.


OXY-1 SMA Devices in Material Research

OXY-1 SMA devices can be used with the PreSens Permeation Cell. This measurement cell allows to determine the oxygen transmission rate of material films. OXY-1 SMA is suited to analyse perforated, permeable materials, while OXY-1 SMA Trace can also be used to determine the OTR in barrier materials. Due to the non-invasive, optical measurement principle the compact oxygen meters do not have to be permanently connected to one Permeation Cell so several samples can be analyzes in parallel. The OXY-1 devices and Permeation Cells are an easy-to-handle and space saving system for oxygen permeability determination in material research. 


Compact O2 Meters for Culture Monitoring

The small OXY-1 SMA devices are ideally suited for all benchtop applications. Combined with oxygen sensor spots integrated in transparent bioreactors or other culture vessels they allow non-invasive, continuous culture monitoring without the risk of contamination. Connected to one of PreSens' O2 flow-through cells even the oxygen content in perfusion systems and bypaths can easily be determined. The OXY-1 SMA devices are quickly installed, easy to operate and even multiple devices can be controlled from one PC. So no matter if lab space or time are limited - OXY-1 SMA and OXY-1 SMA Trace are the solution for culture monitoring!


Quality Control in Food & Beverages with OXY-1 SMA Devices

Set up in a few easy steps these oxygen meters allow fast assessment of the oxygen content in products or containers. Avoid oxidative deterioration and determine the shelf life of your packed food or beverage products, check oxygen taken up while filling or the air-tightness of packaging. O2 content in headspace as well as in liquid products can be measured. As these oxygen meters can be combined with sensors in different designs, e. g. dipping probes, or sensor spots for non-invasive O2 measurements, they can be applied in any stage of the production or filling process and deliver most precise results.


Technical

Specifications  
Oxygen sensors PSt3, PSt6, PSt9 (optical SMA connector)
Temperature sensor Pt100 temperature connector (sensor not included)
Temperature performance From 0 °C to + 50 °C, resolution ± 0.1 °C, accuracy ± 1.0 °C
Pressure sensor Accuracy (+ 25 °C, 750 mbar): ± 1.5 mbar, long-term stability: ± 1 mbar/yr, error band (-20 °C to + 85 °C; 300 to 1100 mbar): ± 2.5 mbar
Power supply DC-Supply: 18 V / 0.83 A / type TR15RA180
Temperature: operating / storage From 0 °C to + 50 °C / - 10 °C to + 70 °C
Relative humidity From 0  to 80 % (non-condensing)
Dimensions (L x W x H) 100 mm (with SMA connector) x 90 mm x 35 mm
Weight 205 g
Digital interface USB interface cable to PC, cable included
RS232, optionally RS485 (PreSens proprietary)
Analog output 4 to 20 mA (current sink)

Related products

SP-PSt3-NAU Optischer O2 Sensor Spot

Oxygen Sensor Spot SP-PSt3-NAU

Sensor spots are the most versatile version of non-invasive…

More
SP-PSt3-YAU optical O2 sensor spots

Oxygen Sensor Spot SP-PSt3-YAU

Sensor spots are the most versatile version of non-invasive…

More
SP-PSt3-SA self-adhesive optical O2 sensor

Self-adhesive Oxygen Sensor Spot SP-PSt3-SA

With the new self-adhesive technology it is easy to…

More
Oxygen Probe for In-Line Measurement OIM-PSt3

Oxygen Probe for In-Line Measurement OIM-PSt3

The oxygen probe for in-line measurement (OIM) consists of a…

More
Oxygen Probe for In-Line Measurement OIM-PSt6

Oxygen Probe for In-Line Measurement OIM-PSt6

The OIM-PSt6 has a stainless steel fitting with standardized…

More
DP-PSt3 optical O2 dipping probe with stainless steel housing

Oxygen Dipping Probe DP-PSt3

The oxygen dipping probe type PSt3 for measurement in normal…

More
Oxygen Dipping Probe DP-PSt6

Oxygen Dipping Probe DP-PSt6

The oxygen probe DP-PSt6 for measurement in trace oxygen…

More

Oxygen Dipping Probe DP-PSt9

This oxygen dipping probe is used to measure ultra-low…

More
SP-PSt9 ultra-trace oxygen sensor spot

Ultra-Trace Oxygen Sensor Spot SP-PSt9

The SP-PSt9 have been designed for measurements of even…

More
SP-PSt6-NAU optical O2 sensor for trace range measurements

Oxygen Sensor Spot SP-PSt6-NAU

Sensor spots are the most versatile version of non-invasive…

More
SP-PSt6-YAU optical O2 sensor spot for trace measurements

Oxygen Sensor Spot SP-PSt6-YAU

These sensor spots are the most versatile version of optical…

More
PreSens Measurement Studio 2 Software for Simultaneous Control of Multiple PreSens Measurement Devices

PreSens Measurement Studio 2

The PreSens Measurement Studio 2 has been developed and…

More

Resources

Software

PreSens Measurement Studio 2 version 4.0.0 - Windows 10
PreSens Profiling Studio version 1.1.0 - Windows 7/8/10
PreSens Oxygen Calculator version 3.1.1 - Windows 7/8/10

×

Presens TV

Watch tutorials, webinars and informative videos about PreSens optical sensor systems.

All videos