Watch tutorials, webinars and informative videos about PreSens optical sensor systems.
Trace Oxygen Measurement in Metal Flow-Through Connectors FTM
Oxygen Exchange Window OEW-PSt6
The Oxygen Exchange Window is integrated in the FTM-PSt6. It enables to easily exchange a used sensor coating without having to replace the whole flow-through connector. The integrated PSt6 type sensor allows trace oxygen measurements in gases and liquids. It has a measurement range of 0 – 5 % oxygen, with a detection limit of 0.002 % oxygen.
- Easy exchange of a used sensor coating
- Online oxygen measurement in perfusion systems
- No consumption of oxygen
- Signal independent of flow velocity
- Autoclavable, SIP (+ 130 °C, 1.5 atm) & CIP (2 % NaOH, + 80 °C)
- Long-term stability
Process Control in Biotech & Pharma
The OIMs, the oxygen probes for in-line measurement, are designed for harsh conditions like high pressure or oil/water mixtures. These systems give high accuracy and are almost maintenance-free as they do not contain any membranes and electrolytes. The sensors are fully autoclavable and sterilizable (CIP & SIP).
In-line Oxygen Measurement in Brewing and Beverage Industry
Even low concentrations of oxygen influence shelf-life and the taste of certain beverages. Due to the extraordinary low detection limit and outstanding accuracy of PreSens trace oxygen sensors, the quality of oxygen-sensitive products such as beer, wine and soft drinks is secured.
The optical sensors have – compared to standard electrodes – a very fast response time and they are very easy to maintain.
|Specifications||Gaseous & Dissolved O2||Dissolved O2|
|*after two-point calibration as described in the manual|
|Measurement range|| |
0 – 5 % O20 – 41.4 hPa
0 – 2 mg/L0 – 56.9 µmol/L
|Limit of detection||0.002 % oxygen|
± 0.0007 % O2 at 0.002 % O2
± 0.0003 mg/L at 0.001 mg/L
|Accuracy*||± 1 ppb or ± 3 % of the respective concentration; whichever is higher|
|Drift at 0 % oxygen||< 2 ppb within 30 days (sampling interval of 1 min.)|
|Measurement temperature range||from 0 to + 50 °C|
|Response time (t90)||< 6 sec.||< 40 sec.|
|Compatibility||Aqueous solutions, ethanol, methanol|
pH 1 – 14
|Cross-sensitivity||Organic solvents, such as acetone, toluene, chloroform or methylene chloride|
Cleaning in place (CIP, 2 % NaOH, + 80 °C, + 176 °F)
|Calibration||Two-point calibration with oxygen-free environment (nitrogen, sodium sulfite) and a second calibration value optimally between 1 % and 2 % oxygen|
|Storage stability||24 months provided the sensor material is stored in the dark|
Oxygen Probe Integrated in Metal Flow-Through Connector FTM-PSt6
An oxygen exchange window for trace oxygen measurement is...
Fibox 4 trace
The Fibox 4 trace is a stand-alone oxygen meter designed for...
OXY-1 WM trace
The OXY-1 WM trace is a precise single-channel oxygen meter...
Fibox 3 trace
The Fibox 3 trace is a proven fiber optic device for precise...
Fibox 3 LCD trace
The Fibox 3 LCD trace is a stand-alone fiber optic oxygen...
OXY-4 SMA trace (G2)
The OXY-4 SMA trace is compatible with sensor spots, dipping...
OXY-10 SMA trace (G2)
The OXY-10 SMA trace is compatible with sensor spots,...