Top

Trace Oxygen Measurements with Excellent Lont-Term Stability

Oxygen Dipping Probe DP-PSt6

The oxygen probe DP-PSt6 for measurement in trace oxygen range basically consists of a polymer optical fiber with an oxygen-sensitive sensor foil attached to one end. It has a measurement range of 0 - 5 % oxygen with a detection limit of 1 ppb.  This end of the fiber is covered in a high grade steel tube to protect both the sensor material and the fiber. The steel tube has an outer diameter of 4 mm and a length of 10 cm. Other lengths are available on request. Due to the use of a polymer optical fiber this probe is compatible to temperatures up to + 70 °C.

  • Measurement range of 0 - 5 % O2 with 1 ppb detection limit
  • Excellent long-term stability
  • Pressure resistant (max. 5 bar)
  • Polarization-free
  • No membrane clenaing and replacement necessary
  • No electrolyte solution to replenish
  • Long shelf life
Get a quote Place an order

Applications

In-line Oxygen Measurement in Brewing and Beverage Industry

Even low concentrations of oxygen influence shelf-life and the taste of certain beverages. Due to the extraordinary low detection limit and outstanding accuracy of PreSens trace oxygen sensors, the quality of oxygen-sensitive products such as beer, wine and soft drinks is secured.
The optical sensors have – compared to standard electrodes – a very fast response time and they are very easy to maintain.


Long-term Measurements in Soil

PreSens offers dipping probes for oxygen measurement that does not consume oxygen. Due to their small dimensions they do not disturb the flow and mass-transport and consequently display the in-situ oxygen concentration. As minisensors from PreSens are long-term stable they can be implanted in soil for many years! With this new method the process of soil aeration, which is very critical for plant productivity, can be investigated.

Dr. Heidi Heuberger, Technical University of Munich, Munich, Germany


Environmental Research: Investigation in Soil Filters

Due to the small outer dimension and mechanical robustness the oxygen dipping probe offers the possibility to measure the oxygen content in-situ in columns filled with filter sands during the flow of sewage (see picture on the left). The results show that a lack of oxygen stops the nitrification process.


Technical

Specifications Gaseous & Dissolved O2 Dissolved O2
*after two-point calibration as described in the manual
Measurement range

0 – 5  % O2

0 – 41.4 hPa

0 – 2 mg/L

0 – 56.9 µmol/L
Limit of detection 0.002 % oxygen

1 ppb

Resolution

± 0.0007 % O2 at 0.002 % O2
± 0.0015 % O2 at 0.2 % O2
± 0.007 hPa at 0.023 hPa

± 0.015 hPa at 2.0 hPa

± 0.0003 mg/L at 0.001 mg/L
± 0.0006 mg/L at 0.09 mg/L
± 0.010 µmol/L at  0.03µmol/L

± 0.020 µmol/L at 2.8 µmol/L
Accuracy* ± 1 ppb or ± 3 % of the respective concentration; whichever is higher
Drift at 0 % oxygen < 2 ppb within 30 days (sampling interval of 1 min.)
Measurement temperature range from 0 to + 50 °C
Response time (t90) < 6 sec. < 40 sec.
Properties    
Compatibility Aqueous solutions, ethanol, methanol
No cross-sensitivity

pH 1 – 14
CO2, H2S, SO2
Ionic species

Cross-sensitivity Organic solvents, such as acetone, toluene, chloroform or methylene chloride
Chlorine gas
Sterilization procedure

Ethylene oxide (EtO)

Cleaning procedure

3 % H2O2
Acidic agents (HCl, H2SO4), max. 4 % – 5 %

Calibration Two-point calibration with oxygen-free environment (nitrogen, sodium sulfite) and a second calibration value optimally between 1 % and 2 % oxygen
Storage stability 60 months provided the sensor material is stored in the dark

Related products

Fibox 4 trace handheld fiber optic O2 meter

Fibox 4 trace

The Fibox 4 trace is a stand-alone oxygen meter designed for…

More
OXY-1 SMA trace Small Optical Trace Oxygen Meter

OXY-1 SMA trace

As a successor of our established Fibox 3 trace, the OXY-1…

More
OXY-4 SMA trace (G3) Multi-Channel Trace Oxygen Meter

OXY-4 SMA trace (G3)

The OXY-4 SMA trace is compatible with sensor spots, dipping…

More
Fibox 3 trace Fiber Optic Trace Oxygen Meter

Fibox 3 trace

The Fibox 3 trace is a proven fiber optic device for precise…

More
Weights for Dipping Probes

Weights for Dipping Probes

These weights are specially designed for PreSens dipping…

More
Automated Micromanipulator with Heavy Stand

Automated Micromanipulator AM

The Automated Micromanipulator is specifically designed for…

More
PreSens Profiling Studio Software screenshots

PreSens Profiling Studio

This software enables control of the Automated…

More
×

Knowledge

Select by industry

Presens TV

Watch tutorials, webinars and informative videos about PreSens optical sensor systems.

All videos