Watch tutorials, webinars and informative videos about PreSens optical sensor systems.
Micro-fiber Optic Oxygen Transmitter
The Microx TX3 is a precise micro fiber optic oxygen meter. It is used with oxygen microsensors based on a 140 µm optical fiber, which are available in different designs. This device is very versatile and can be applied whenever a small tip size and fast response time are needed. Microx TX3 is used for microsensors type PSt1 (detection limit 20 ppb, 0 – 50 % oxygen). It is a temperature compensated system and delivered with an external temperature sensor. The oxygen meter is connected to a PC either via USB or RS232 interface. With the included software the transmitter can be controlled and data collected. On top, programmable outputs and a trigger input for connection to a data logger are integrated.
- For use with oxygen microsensors
- Measures from 20 ppb to 50 % oxygen
- Analogue in- and outputs
- Software included
|Oxygen sensor||PSt1 (optical ST connector)|
|Temperature sensor||1 x Pt1000 temperature connector (sensor included)|
|Temperature performance||from 0 °C to + 50 °C, Resolution ± 0.1 °C, Accuracy ± 1.0 °C|
|Power supply||18 VDC / 5 W (110 - 240 VAC, 50 /60 Hz, adapter included)|
|Temperature: operating /storage||from 0 °C to + 50 °C / from -10 °C to + 60 °C|
|Relative humidity||up to 80 % (non condensing)|
|Dimensions||210 mm x 120 mm x 50 mm|
|Digital interface||RS 232 interface (RJ 11 4/4 to DSub9, cable included)|
USB Interface (RJ 11 4/4 to USB type A, transmitter adapted cable included)
|External trigger||TTL compatible with galvanic Isolation (BNC connector)|
|Analogue output specifications|
Dual Outputs, 0 - 4095 mV, Resolution 12 bit, accuracy ± 10 mV (BNC connector)
Needle-Type Oxygen Microsensor NTH-PSt1
This sensor is a miniaturized optical oxygen sensor designed...
Implantable Oxygen Microsensor IMP-PSt1
This miniaturized optical oxygen microsensor is designed for...
Flow-Through Cell Housed Oxygen Microsensor FTCH-PSt1
The oxygen microsensor housed in a flow-through cell is...
Oxygen Microsensor Integrated in a Metal Flow-Through Cell FTCM-PSt1
A microsensor is integrated in a stainless steel tee with...
Manual Micromanipulator MM
The Manual Micromanipulator MM is specifically designed for...
Automated Micromanipulator AM
The Automated Micromanipulator is specifically designed for...
The battery cables are compatible with PreSens...
LP1 Control Panel
The LP-1 control panel has an LCD display which allows to...
Microx TX3 for PSt1 version 6.02 - Windows XP/Vista/7
USB Serial Driver for USB-RS232-RJ 4-4 - Windows XP/Vista/7/8
USB Serial Driver for USB Serial Adapter, single & multi-port - Windows 7/8/8.1
PreSens Profiling Studio version 1.1.0 - Windows 7/8/10