Control Your Oxygen Measurements from PC or Smartphone

OXY-1 SMA-BT Oxygen Meter

The single channel OXY-1 SMA-BT meter is compatible with non-invasive sensors, dipping probes and flow-through cells of type PSt3 (detection limit 15 ppb dissolved oxygen, 0 - 100 % oxygen) The device is USB powered and when used with a power bank it can be set up even out in the field. OXY-1 SMA-BT has temperature compensation, so most precise measurements in environments with changing temperature can be taken. It can be controlled wirelessly with the PreSens Wireless Studio (PWS) app (iOS or Android) from a smartphone or tablet. Connected to a PC it can also be operated with the PreSens Measurement Studio 2 (PMS2) software, which enables simultaneous control of up to 5 OXY-1/-4 SMA devices (up to 20 measurement channels). With numerous features, additional pressure and salinity compensation, the software versions make the OXY-1 SMA-BT is suitable for numerous applications.

  • Compact & lightweight
  • Low power consumption
  • Communication via USB or wireless
  • Temperature compensation
  • On-board atmospheric pressure sensor
Get a quote Place an order


Compact O2 Meters for Culture Monitoring

The small OXY-1 SMA devices are ideally suited for all benchtop applications. Combined with oxygen sensor spots integrated in transparent bioreactors or other culture vessels they allow non-invasive, continuous culture monitoring without the risk of contamination. Connected to one of PreSens' O2 flow-through cells even the oxygen content in perfusion systems and bypaths can easily be determined. The OXY-1 SMA devices are quickly installed, easy to operate and even multiple devices can be controlled from one PC. So no matter if lab space or time are limited - OXY-1 SMA and OXY-1 SMA Trace are the solution for culture monitoring!

OXY-1 SMA Devices for Biological Research

The OXY-1 SMA and OXY-1 SMA Trace can be set up in a few quick steps and fit almost anywhere. As the devices are powered via USB no extra power connection, cables or adapters are necessary. Use them for fast checks on the oxygen content in samples or continuous long-term measurements. Applicable with different types of slender dipping probes, flow-through cells or non-invasive oxygen sensor spots the OXY-1 SMA devices can be used for oxygen monitoring in most different measurement set-ups. Check the oxygen content in water or sediment samples, monitor microbial O2 consumption or respiration of small organisms, even in perfusion systems oxygen can be measured continuously. With temperature, pressure and salinity compensation these oxygen meters always give precise oxygen measurements and are the tools for every research team.

Quality Control in Food & Beverages with OXY-1 SMA Devices

Set up in a few easy steps these oxygen meters allow fast assessment of the oxygen content in products or containers. Avoid oxidative deterioration and determine the shelf life of your packed food or beverage products, check oxygen taken up while filling or the air-tightness of packaging. O2 content in headspace as well as in liquid products can be measured. As these oxygen meters can be combined with sensors in different designs, e. g. dipping probes, or sensor spots for non-invasive O2 measurements, they can be applied in any stage of the production or filling process and deliver most precise results.

OXY-1 SMA Devices in Material Research

OXY-1 SMA devices can be used with the PreSens Permeation Cell. This measurement cell allows to determine the oxygen transmission rate of material films. OXY-1 SMA is suited to analyse perforated, permeable materials, while OXY-1 SMA Trace can also be used to determine the OTR in barrier materials. Due to the non-invasive, optical measurement principle the compact oxygen meters do not have to be permanently connected to one Permeation Cell so several samples can be analyzes in parallel. The OXY-1 devices and Permeation Cells are an easy-to-handle and space saving system for oxygen permeability determination in material research. 


Oxygen sensor PSt3 (optical SMA connector)
Temperature sensor Pt100 temperature connector (sensor not included)
Temperature performance From 0 °C to + 50 °C, resolution ± 0.1 °C, accuracy ± 1.0 °C
Power supply Supply voltage: 5 VDC (USB-2.0-Mini-B), current / power: 400 mA
Temperature: operating / storage From 0 °C to + 50 °C / + 5 °C to + 40 °C
Relative humidity From 0 to 80 % (non-condensing)
Dimensions (W x L x H) ca. 35 mm x 101 mm (with connectors) x 33 mm
Weight 152 g
Digital Interface USB interface cable to PC, cable included
Bluetooth 4.0


Related products

PreSens Wireless Studio Mobile App for Bluetooth-Capable PreSens Oxygen Measurement Devices

PreSens Wireless Studio

PreSens Wireless Studio is a mobile app that allows…

PreSens Measurement Studio 2 Software for Simultaneous Control of Multiple PreSens Measurement Devices

PreSens Measurement Studio 2

The PreSens Measurement Studio 2 has been developed and…

SP-PSt3-NAU Optischer O2 Sensor Spot

Oxygen Sensor Spot SP-PSt3-NAU

Sensor spots are the most versatile version of non-invasive…

Polymer Optical Fiber POF with two SMA sockets

Polymer Optical Fiber POF

A polymer optical fiber (POF) is needed to transfer…

FTC-SU-PSt3 single-use flow-through cell with O2 sensor

Single-Use O2 Flow-Through Cell FTC-SU-PSt3-S

Miniaturized chemical optical oxygen sensors integrated in…

O2 Sensor Stick SST-PSt3-US

O2 Sensor Stick SST-PSt3-US

This Luer Lock adapter is equipped with a miniaturized O2

DP-PSt3 optical O2 dipping probe with stainless steel housing

Oxygen Dipping Probe DP-PSt3

The oxygen dipping probe type PSt3 for measurement in normal…

FTC-PSt3 O2 Flow-Through Cell

O2 Flow-Through Cell FTC-PSt3

Miniaturized chemical optical oxygen sensors integrated in…

SP-PSt3-YAU optical O2 sensor spots

Oxygen Sensor Spot SP-PSt3-YAU

Sensor spots are the most versatile version of non-invasive…

Oxygen-Sensitive Cap OSC-PSt3

Oxygen-Sensitive Cap OSC-PSt3

To measure the oxygen ingress in non-transparent bottles,…

FTM-M10-PSt3 metal flow-through cell with O2 sensor

Oxygen Sensor Integrated in Metal Flow-Through Cell FTM-M10-PSt3

An Oxygen Exchange Cap (OEC-M10) with PSt3 sensor (max.…

FTM-PSt3 Oxygen Probe Integrated in Metal Flow-Through Connector

Oxygen Probe Integrated in Metal Flow-Through Connector FTM-PSt3

An oxygen exchange window is integrated in a metal…

Oxygen Probe for In-Line Measurement OIM-PSt3

Oxygen Probe for In-Line Measurement OIM-PSt3

The oxygen probe for in-line measurement (OIM) consists of a…

Oxygen Exchange Cap OEC-PSt3-NAU for OXYBase® WR

Oxygen Exchange Cap OEC-PSt3-NAU

The Oxygen Exchange Cap is made of stainless steel and has…

DO Nice Port weldable O2 sensor-port for cell culture bags

DO Nice Port

This port with integrated oxygen sensor is for customized…


Presens TV

Watch tutorials, webinars and informative videos about PreSens optical sensor systems.

All videos