Top

Contactless Oxygen Measurements

Oxygen Sensor Spot SP-PSt7-YAU

These oxygen sensor spots are most versatile tools for precise oxygen monitoring in any transparent or semi-transparent vessel. Measurements are then taken contactless from the outside – through the vessel wall. The SP-PSt7-YAU measure dissolved as well as gaseous O2. They have a measurement range from 0 – 100 % O2, with a detection limit of 0.03 % O2. The SP-PSt7-YAU can be autoclaved.

  • Non-invasive measurements through the vessel wall
  • No consumption of oxygen
  • Signal independent of flow velocity
  • Measures oxygen in liquids as well as in gas phase
Get a quote Place an order

Applications

Bioprocess Development: Oxygen Monitoring in Shake Flasks

O2 supply is one of the major issues in the cultivation of aerobic organisms. Shake flask cultures are widely applied in academic and industrial bioprocess development. As adequate methods for real monitoring of dissolved oxygen were missing, sufficient O2 supply is usually assumed. The non-invasive oxygen sensors in shake flasks now ensure oxygen supply and give new insights into metabolic activity.


Respiration & Photosynthesis: Oxygen Monitoring in Glass Vials

Determination of respiratory activity is often performed for water organisms such as invertebrates, larval stages or eggs, but also for bacteria, cell cultures, yeasts or fungi. For algae measurement of photosynthetic activity is of great interest. Using our 20 mL SensorVial with an integrated sensor stripe oxygen can be measured simultaneously in the liquid sample and in the headspace. Autoclavable SensorVials for stirred and non-stirred applications are available.


Technical

Specifications Gaseous & Dissolved O2 Dissolved O2
*after two-point calibration as described in the manual
Measurement range 0 – 100 % O2
0 – 1000 hPa

0 – 45 mg/L

0 – 1400 µmol/L
Limit of detection 0.03 % oxygen 15 ppb
Resolution

± 0.01 % O2 at 1  % O2
± 0.05 % O2 at 20.9 % O2

± 0.005 mg/L at  0.4mg/L

± 0.025 mg/L at 9.06 mg/L
Accuracy at + 20 °C* ± 0.05 % O2 or ± 3 % rel.
Measurement temperature range from 0 to + 50 °C
Response time (t90) < 6 sec. < 40 sec.
Properties    
Compatibility Aqueous solutions, ethanol, methanol
No cross-sensitivity

pH 1 – 14
CO2, H2S, SO2
Ionic species

Cross-sensitivity

Organic solvents, such as acetone, toluene, chloroform or methylene chloride
Chlorine gas

Sterilization procedure Steam sterilization
Ethylene oxide (EtO)
Cleaning procedure

Cleaning in Place (CIP, 2 % NaOH, + 80 °C, + 176 °F)
3 % H2O2, ethanol, soap solution

Calibration Two-point calibration with oxygen-free environment (nitrogen, sodium sulfite) and air-saturated environment
Storage stability 60 months provided the sensor material is stored in the dark at room temperature

Related products

Microx 4 handheld optical O2 meter

Microx 4

The Microx 4 is a completely stand-alone, portable fiber…

More
Microx 4 trace Stand-alone Fiber Optic Oxygen Meter for Contactless and Micro-invasive Measurements

Microx 4 trace

The Microx 4 trace is a completely stand-alone, portable…

More
OXY-1 ST Compact Oxygen Transmitter for Use with Numerous Sensor Designs

OXY-1 ST

This extremely small and lightweight oxygen meter can be…

More
OXY-1 ST trace Small & Versatile Trace Oxygen Meter for Use with Different Sensor Designs

OXY-1 ST trace

The OXY-1 ST trace is very compact and can be set up almost…

More
Polymer Optical Fiber POF with two SMA sockets

Polymer Optical Fiber POF

A polymer optical fiber (POF) is needed to transfer…

More
SOA Stick-On Adapter for Polymer Optical Fibers

Stick-On Adapter SOA

The stick-on adapter is used to attach the polymer optical…

More
Adapter for Round Containers with ST socket ARC1-ST

Adapter for Round Containers ARC1-ST

The Adapter for Round Containers ARC1-ST is an adjustable…

More
OXY-4 ST (G3) Multi-Channel O2 Meter for Use with Numerous Sensor Designs

OXY-4 ST (G3)

Due to its small outer dimensions OXY-4 ST can be set up…

More
OXY-4 ST trace (G3) Versatile Multi-Channel Trace O2 Meter

OXY-4 ST trace (G3)

The OXY-4 ST trace can be used with O2 microsensor in…

More

Resources

FAQs

Can I sterilize fiber optic sensors? Do I have to mount the sensors in the dark because it says "Protect from light" on the packing? Do the sensors work in turbid solutions? Does each oxygen sensor spot need a separate calibration, or are the calibration values valid for the complete sensor spot batch? How can I convert an oxygen value into a different oxygen unit? How can I prepare the calibration solutions cal0 and cal100 for oxygen sensors? How do I import data into excel from a text file containing measurement data? How do I verify whether the oxygen sensor is giving correct readings (performance proof)? How does an oxygen sensor work? How does salinity affect the oxygen measurement? How does temperature affect the oxygen measurement? In which vessel can I integrate a sensor spot? Is the glue or the sensor spot biocompatible - which tests were done? Are there any studies on leachables and extractables? Is there a standard recommended distance to place the polymer optical fiber (POF) from the sensor spot? The Stern-Volmer-equation What does -YAU, -NAU or -SA stand for in the oxygen sensor spot names and what is the difference between those sensor types? What factors will affect the oxygen reading? What is the time of delivery? Where do I need sensor spot sizes different from the common diameter of 5 mm (approx. 0.2 inch)? Which glue can I use to integrate optical sensor spots? Which side of the oxygen sensor spot should face the medium? Which substances can interfere with the optical O2, pH and CO2 measurements?

Software

×

Presens TV

Watch tutorials, webinars and informative videos about PreSens optical sensor systems.

All videos